1. AC power must be used for LCD power supply. DC power will destroy LC and affect LCD life;
2. LCD should not be used or worked under strong sunlight for a long time, especially UV (ultraviolet) light;
3. LCM must do a good job of electrostatic protection during assembly and use, such as ion fans, electrostatic guns, etc.;
4. AC power must be used for LCD power supply. DC power will destroy LC and affect LCD life;
5. LCD should not be used or worked under strong sunlight for a long time, especially UV (ultraviolet) light;
LCD cannot be swallowed and touched. If accidentally touched on your hands, please rinse immediately with water. LCD is a glass product with precision processing and special orientation treatment. If pressure is applied to the LCD, the orientation will be destroyed and it will be difficult to restore to the original state. If it falls or hits a hard object It is easy to break, especially the edge of the LCD. Be sure to avoid surface bumps.
LCD is a glass product that has undergone precision processing and special orientation treatment. If pressure is applied to the LCD, the orientation will be destroyed and difficult to restore to the original state. If it is dropped or hits hard objects, it is easy to break, especially the edge of the LCD. Be sure to avoid surface bumps.
Copyright © 2020 Hangzhou Gena Electronics Co., Ltd.
